If you know the exact part number, enter it in the search box. Most part numbers require an MS prefix (MS40S5-2S). If you are unsure of the part number, type the first 3 letters or numbers and put an * after it to broaden your search results. Or try our SITE MAP.
Sizing Chart : For your reference, we have included a chart at the bottom of this page which shows the panel thickness ranges and corresponding stud lengths when used with fixed depth or adjustable depth receptacles.
Price Breaks : The per each price is displayed with the product. Quantity based discount prices are automatically generated and shown when the item is added to the shopping cart. The breaks are at the following quantities: Each, 50, 100, 250, 500 and 1000. Please Contact Us for a quote on larger quantities.
This drawing is for reference only. The chart below has the stud dash number in the far left column. This is the number that is stamped in the head of the stud. The two middle columns show the Total Material Thickness range (TMT) of each stud length when using Fixed depth or Adjustable depth receptacles. The far right column shows the S dimension for each dash number so you can easily measure and replace an existing stud. Dimensions are in inches. For metric conversion, use this formula: Inches x 25.4 = mm. mm ÷ 25.4 = Inches. If you have any questions or need anything else, please Contact Us.
* Please Note: These thickness ranges assume you are using flush grommets. When using low profile or large area grommets, use one dash number longer than this chart indicates for any given material thickness.