|
| C-Spec 28S3 Studs, Steel Phillips Head (Camloc® compatible)
These studs feature a standard #1 Phillips cross recess head. They are steel with a bright zinc and yellow (gold) chromate finish. Additional lengths and other finishes are available upon request (minimums may apply).
|
Sizing Chart : For your reference, we have included a chart at the bottom of this page which shows the panel thickness ranges and corresponding stud lengths when used with fixed depth or adjustable depth receptacles.
Price Breaks : The per each price is displayed with the product. Quantity based discount prices are automatically generated and shown when the item is added to the shopping cart. The breaks are at the following quantities: Each, 50, 100, 250, 500 and 1000. Please Contact Us for a quote on larger quantities.
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.70
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.85
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.85
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.85
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.85
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.85
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$2.85
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$3.20
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$3.20
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$3.20
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
Price: |
$3.20
|
 |
Stud, Zinc Plated Steel, Phillips Head
|
This drawing is for reference only. The chart below has the stud dash number in the far left column. This is the number that is stamped in the head of the stud. The two middle columns show the Total Material Thickness range (TMT) of each stud length when using Fixed depth or Adjustable depth receptacles. The far right column shows the S dimension for each dash number so you can easily measure and replace an existing stud. Dimensions are in inches. For metric conversion, use this formula: Inches x 25.4 = mm. mm ÷ 25.4 = Inches. If you have any questions or need anything else, please Contact Us.
|